No results were found for the filter!
MY IOT ADAPTER
MY IOT ADAPTER The gateway to external hardware solutions Description: Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with one Infineon IC and come with a ready to use Arduino...
SEGGER 8.06.05 - 10-Pin Needle Adapter
Normal 0 21 false false false EN-US X-NONE X-NONE SEGGER 8.06.05 - 10-Pin Needle Adapter mating connector or programming header. The designed pattern with 3 locating pins ensures, that the adapter can not be connected the wrong way. The...
SEGGER 8.20.00 - J-Trace PRO Cortex
SEGGER 8.20.00 - J-Trace PRO Cortex ""J-Trace PRO Cortex provides support for Cortex-A/R/M based microcontrollers. The SuperSpeed USB 3.0 interface of J-Trace PRO Cortex enables continuous streaming trace via USB with the full trace...
MIIC-213G iPort/AFM 2 RS-232 to I2C Host...
MIIC-213G iPort/AFM 2 RS-232 to I2C Host Adapter with ASCII Fast Mode and Circuit Sense, Global Power iPort/AFM 2 brings I2C directly to any computer with an RS-232 serial port. Just plug an iPort/AFM 2 into your computer's legacy or...
MIIC-208 iPort/USB 2, USB to I2C Host Adapter...
iPort/USB 2 brings I2C directly to your Windows, Linux, or MacOS PC. Just load our free software, plug the iPort/USB 2 into your computer's USB port, and you will be sending and receiving I2C Bus messages in minutes In addition to being...
ULINKplus debug adapter
ULINKplus debug adapter The ULINKplus debug adapter connects your PC's USB port to your target system (via a 10-pin Cortex Debug connector). It allows you to program, debug, and analyze your applications and their power consumption using...
SEGGER 8.07.00 - J-Link JTAG Isolator
SEGGER 8.07.00 - J-Link JTAG Isolator Standard .1" 20-pin male connector to provide electrical isolation.
SEGGER 8.07.02 - J-Link USB Isolator
SEGGER 8.07.02 - J-Link USB Isolator J-Link USB connector to provide host side electrical isolation.
SEGGER 8.07.01 - J-Link SWD Isolator
SEGGER 8.07.01 - J-Link SWD Isolator Standard .1" 20-pin male connector to provide electrical isolation.
SEGGER 8.06.16 - J-Link 6-Pin Needle Adapter
SEGGER 8.06.16 - J-Link 6-Pin Needle Adapter "Adapts from .1"" 20-pin J-Link connector to .05"" 6-pin inch needle pattern. Incl. 6-pin cable with legs."
SEGGER 8.06.04 - J-Link 10-pin Needle Adapter
SEGGER 8.06.04 - J-Link 10-pin Needle Adapter "Adapts from .1"" 20-pin Standard connector to .05"" 10-pin needle pattern. Incl. 10-pin cable with legs."
SEGGER 8.18.00 - J-Trace PRO for Cortex-M
SEGGER 8.18.00 - J-Trace PRO for Cortex-M "J-Trace PRO for Cortex-M is setting a new standard for trace probes. It enables continuous streaming trace, lifting the limitations by internal buffers and slow data transmission to give you all...