KIT_A2G_TC332_5V_TRB_S

With this general purpose AURIX™ TC332 evaluation board, customers can quickly start developing, evaluating, and testing their software. The TC332LP is mounted on a socket so that it can be easily changed, making it particularly suitable for early project development.

Summary of Features:

Infineon’s AURIX™ TC332 in TQFP-80 Package

• FlexRay™ Transceivers
• High-Speed CAN Transceivers (CAN-FD capable)
• USB to UART bridge
• Serial Eeprom
• LIN Transceiver
• Crystal 20MHz (default) or External Clock
• USB miniWiggler JDS for easy debugging
• 8 Low Power Status LEDs
• 8-DIP switches for configuration
• access to all pins of controller
• 100mm x 160mm (EURO-Board)

Connectors:

The TC332 TriBoard offers a wide variety of connectors:

• Standard power connector
• Micro USB connector for ASC Interface (ASC0) and miniWiggler
• 16-pin header for JTAG interface (OCDS)
• 2 x 10-pin header for DAP and DAP_SCR
• 10pin (2x5) Header for LIN Transceiver (LIN)
• 2 x 10pin (2x5) Header for CAN High-Speed Transceiver (CAN0 and CAN1)
• 2 x 10pin (2x5) Header for FlexRay™ (ERAY-A and ERAY-B)
• four 80-pin connectors (male) + four 80-pin connectors (female) with all I/O signals
• optional ETK connector
• optional 6pin (IEEE1394) Socket for HSCT

Components:

• Infineon’s Multi-Voltage Safety Micro Processor Supply TLF35584QV
• Three LEDs to validate power supply (5Volt / 3,3 Volt / 1,25 Volt)
• LED indicating safe state signal 2 from TLF35584
• LED indicating /HDRST (ESR0) active state
• LED indicating active miniWiggler JDS
• LED switched via DAS software
• 2 x Infineon’s FlexRay™ Transceiver TLE9221SX
• 2 x Infineon’s High-Speed CAN-Transceiver TLE9251VSJ
• Infineon’s LIN-Transceiver TLE 7259-3GE
• USB to UART bridge FT2232HL (FTDI)
• 8 general-purpose LEDs – 2K SPI Bus Serial Eeprom (MICROCHIP)
• Reset switch
• Enable switch
• Generic switch
• 4-pin Dip switch

Link to Infineon

Data Sheets