KIT_AURIX_TC265_TRB, TC265, TRB, Aurix, TC2x5

449,00 € *

Inhalt: 1 Stück

zzgl. MwSt. zzgl. Versandkosten

Sofort versandfertig, Lieferzeit ca. 1-3 Werktage

Artikel-Nr.: 37.96.0362.0
Freitextfeld 1: KIT_AURIX_TC265_TRB, TC265, TRB, Aurix, TC2x5
Freitextfeld 2: SP001073834

The KIT_AURIX_TC265_TRB is a versatile tool, providing quick access to the... mehr

Menü schließen

Produktinformationen "KIT_AURIX_TC265_TRB"

The KIT_AURIX_TC265_TRB is a versatile tool, providing quick access to the capabilities of TriCore's powerful architecture. Applications can be developed easily. The Evaluation Board is equipped with a variety of memories and peripherals for connection to the environment. There is also an interface for the On Chip Debugging Features (OCDS1 and DAP). The kit also includes several sets of development tools, which are stored on the included Evaluation Board CD-ROM. The Evaluation Board allows easily the development of TriCore applications with the corresponding tools.

Summary of Features

Infineon’s TC2X5 (e.g. TC275, TC265, TC2D5) Controller in LQFP-176 Package
FlexRay Transceivers
Safety device (optional)
High Speed CAN Transceivers
USB to UART bridge
Ethernet Gigabit PHY
Serial Eeprom
LIN Transceiver
Crystal 20MHz (default) or External Clock
USB miniWiggler JDS for easy debugging
8 Low Power Status LEDs
8-DIP switches for configuration
access to all pins of controller
100mm x 160mm (EURO-Board)
optional power supply via USB

Connectors:

The AURIX™ TC2X5 TriBoard offers a wide variety of connectors :

Standard power connector
Micro USB connector for ASC Interface (ASC0) and miniWiggler
RJ45 connector for Ethernet
16-pin header for JTAG interface (OCDS)
10-pin header for DAP
10pin (2x5) Header for LIN Transceiver (LIN)
2 x 10pin (2x5) Header for CAN High Speed Transceiver (CAN0 and CAN1)
2 x 10pin (2x5) Header for FlexRay (ERAY-A and ERAY-B)
four 80-pin connectors (male) + four 80-pin connectors (female) with all I/O signals – optional ETK connector
optional 10pin (2x5) Socket for HSCT
Aurora connector (only with Emulation Device)

Components :

Infineon’s Next generation micro controller supply TLE7368-3E
Three LEDs to validate power supply (5Volt / 3,3 Volt / 1,3 Volt)
LED indicating /HDRST (ESR0) active state
LED indicating activ miniWiggler JDS
LED switched via DAS software
2x FlexRay Transceiver TJA1080A
2 x Infineon’s High Speed CAN-Transceiver TLE6250G
Infineon’s LIN-Transceiver TLE7259-2GE
Infineon’s Safety Device SAK-CIC61508 (optional)
USB to UART bridge FT2232HL
Single Port Gigabit Ethernet PHY PEF7071
SPI eeprom (Atmel)
8 general purpose LEDs
Reset switch
4-pin Dip switch