€1,100.00 *
Content: 1 Stück (€0.00 * / Stück)

Prices plus VAT plus shipping costs

Delivery time 5 - 7 Workdays

  • 37.96.0309.0
  • SP001597336
KIT_A2G_TC397A_S_TRB Description: The User Manual provide information about using,... more
Product information "KIT_A2G_TC397A_S_TRB"



The User Manual provide information about using, configuration and connecting the TriBoard with Infineon AURIX™ TC3X7 ADAS device. The manual provide information for different hardware types. There exist different hardware with Through Hole socket (TriBoard TC3X7 ADAS TH) and soldered devices (TriBoard TC3X7 ADAS). The schematic is identically for the all boards if not other mentioned in chapter schematic. The placing on the boards is slightly different around the TC3X7 ADAS itself dependent of the space (socket need more space and has through hole), but the most components are on the same location. All figures are valid for each board if not differently mentioned.

Summary of Features:

• Infineon’s TC3X7 ADAS (TC397 ADAS) AURIX™ 2G Controller in LFBGA-292_ADAS Package
• FlexRay™ 1) Transceivers
• High Speed CAN Transceivers (CAN-FD capable)
• USB to UART bridge
• Ethernet Gigabit PHY
• Serial Eeprom
• LIN Transceiver
• Crystal 20MHz (default) or External Clock
• USB miniWiggler JDS for easy debugging
• 8 Low Power Status LEDs
• 8-DIP switches for configuration
• access to all pins of controller
• 100mm x 160mm (EURO-Board)



The TC3X7 ADAS TriBoard offers a wide variety of connectors:
◦ Standard power connector
◦ Micro USB connector for ASC Interface (ASC0) and miniWiggler
◦ RJ45 connector for Ethernet
◦ 16-pin header for JTAG interface (OCDS)
◦ 2 x 10-pin header for DAP and DAPE (DAPE only usable on Emulation Device)
◦ 10pin (2x5) Header for LIN Transceiver (LIN)
◦ 2 x 10pin (2x5) Header for CAN High Speed Transceiver (CAN0 and CAN1)
◦ 2 x 10pin (2x5) Header for FlexRay™ (ERAY-A and ERAY-B)
◦ 2 x 60pin (2x30) high speed connector for MMIC/RIF
◦ four 80-pin connectors (male) + four 80-pin connectors (female) with all I/O signals
◦ optional ETK connector
◦ optional 6pin (IEEE1394) Socket for HSCT
◦ optional Aurora connector (only with Emulation Device)


• Infineon’s Multi Voltage Safety Micro Processor Supply TLF35584QV
• Three LEDs to validate power supply (5Volt / 3,3 Volt / 1,25 Volt)
• LED indicating safe state signal 2 from TLF35584
• LED indicating /HDRST (ESR0) active state
• LED indicating activ miniWiggler JDS
• LED switched via DAS software
• 2 x Infineon’s FlexRay™ Transceiver TLE9221SX
• 2 x Infineon’s High Speed CAN-Transceiver TLE9251VSJ
• Infineon’s LIN-Transceiver TLE 7259-3GE
• USB to UART bridge FT2232HL (FTDI)
• Single Port Gigabit Ethernet PHY PEF7071 (LANTIQ)

• 8 general purpose LEDs
• 2K I 2C Serial Eeprom with EUI-48™ 1) Node Identity (MICROCHIP)
• Reset switch
• Enable switch
• Generic switch
• 4-pin Dip switch

Target Applications:

•77-79GHz Radar

Related links to "KIT_A2G_TC397A_S_TRB"
Read, write and discuss reviews... more
Customer evaluation for "KIT_A2G_TC397A_S_TRB"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

AURIX Starter Kit TC275 AURIX Starter Kit TC275
Content 1 Stück (€0.00 * / 0 Stück)
€549.00 *
AURIX Application Kit TC224 TFT AURIX Application Kit TC224 TFT
Content 1 Stück (€0.00 * / 0 Stück)
€149.00 *
AURIX Starter Kit TC224 AURIX Starter Kit TC224
Content 1 Stück (€0.00 * / 0 Stück)
€350.00 *
Content 1 Stück (€0.00 * / Stück)
€1,120.00 *
Content 1 Stück (€0.00 * / Stück)
€1,190.00 *